מכונת ניקוב Puma - טופז מסחר ושירותים

Puma Series capacities

The full capacities of the Puma series of ironworker machines can be observed in the following table:

FEATURES	PUMA 55	PUMA 80	PUMA 110	PUMA 165	PUMA 220
PUNCHING
Punching Power	55 Ton	80 Ton	110 Ton	165 Ton	220 Ton
Maximum Capacity	Ø 40×10 mm	Ø 40×14 mm	Ø 40×20 mm	Ø 40×30 mm	Ø 40×40 mm
Throat S / SD	500 / 750 mm	510 / 750 mm	500 / 750 mm	510 / 760 mm	510 / 800 mm
Working Height S / SD	1060 / 810 mm	1094 / 1194 mm	991 / 1066 mm	1060 / 1060 mm	1013 / 1013 mm
PUNCHING OF SECTIONS WITH GOOSENECK DIE HOLDER
I on the Leg	100-300 mm	100-300 mm	100-450 mm	100-450 mm	100-450 mm
I on the Web	100-500 mm	100-500 mm	100-500 mm	120-500 mm	120-500 mm
U on the Leg	100-300 mm	100-300 mm	120-400 mm	120-400 mm	120-400 mm
U on the Web	120-260 mm	120-380 mm	120-400 mm	120-400 mm	120-400 mm
GENERAL FEATURES
Motor Power	5 kW	9 kW	9 kW	15 kW	20 kW
Strokes per minute based (on 20 mm. stroke)	37	40	28	28	25
Maximum Stroke	60 mm	70 mm	80 mm	100 mm	100 mm

Capacities based on a material resistance of 45 Kg/mm2.
GEKA may change technical specifications, equipment and photographs of models, as well as any other information contained herein.
Technical characteristics valid except for typographical errors or omissions.

PUMA series of punching machines for punching flat bars and profiles. Their throat depth can get up to 750 mm and with a punching power that can get up to 220 Tons. There are five ironworker machines available.

Geka-punzonadoras-hidraulicas-puma-series

Puma series features

The machines within the Puma series are very similar, what differs them is mainly their punching power, their maximum punching capacity and their motor power:

Puma 55
Punching power: 55 Ton
Maximum punching capacity: Ø 40×10 mm
Motor power: 5 kW

Puma 80
Punching power: 80 Ton
Maximum punching capacity: Ø 40×14 mm
Motor power: 9 kW

Puma 110
Punching power: 110 Ton
Maximum punching capacity: Ø 40×20 mm
Motor power: 9 kW

Puma 165
Punching power: 165 Ton
Maximum punching capacity: Ø 40×30 mm
Motor power: 15 kW

Puma 220
Punching power: 220 Ton
Maximum punching capacity: Ø 40×40 mm
Motor power: 20 kW

General features

There are some features that are common for all the Puma series from Geka ironworkers:

Guided cylinder with anti-rotation system.
Progressive centring of the punch.
Quick punch change.
Safety protections.
Large number of optional equipment to perform a wide range of jobs.
Range of punching machines from 55 to 220 Ton with throat depths between 500 and 800 mm.

More information about the capacities of the puma series may be observed in the capacities table.