מספריים אוניברסליים עם דאבל פיסטון Hydracrop

Hydracrop series capacity

The features and capacities of the Hydracrop series may be observed in the following table:

FEATURES	HYDRACROP 55	HYDRACROP 80	HYDRACROP 110	HYDRACROP 165	HYDRACROP 220
PUNCHING
Punching Power	55 Ton	80 Ton	110 Ton	165 Ton	220 Ton
Maximum Capacity with gooseneck die holder	Ø 40×10 mm Ø 20×20 mm	Ø 40×14 mm Ø 24×24 mm	Ø 40×20 mm Ø 28×28 mm	Ø 40×30 mm Ø 34×34 mm	Ø 40×40 mm
Throat Depth S/SD	250/500 mm	300/500 mm	300/610 mm	510/610 mm	385/475 mm
Working Height	1085 mm	1095 mm	1165 mm	1110 mm	1110 mm
FLAT BARS SHEARING
Flatbar with slight deformation	300×15 mm 200×10 mm	450×15 mm 300×20 mm	600×15 mm 400×20 mm	750×20 mm 400×30 mm	750×20 mm 400×30 mm
Length of Blades	305 mm	475 mm	605 mm	765 mm	765 mm
Working Height	880 mm	850 mm	960 mm	870 mm	870 mm
ANGLE CUTTING
Shearing Power	1100 kN	1500 kN	1800 kN	3000 kN	3000 kN
L at 90º Shear without deformation	120x120x10 mm	130×130 x13 mm	152x152x13 mm	205x205x18 mm	205x205x18 mm
L at 45 º	70x70x7 mm	70x70x7 mm	70x70x7 mm	70x70x7 mm	70x70x7 mm
L at 90º Shear with slight deformation (optional blade)	130x130x13 mm	152x152x13 mm	160x160x16 mm	205x205x25 mm	205x205x25 mm
SOLID BARS SHEARING
Round Bar	40 mm	45 mm	50 mm	60 mm	60 mm
Square Bar	40 mm	45 mm	50 mm	60 mm	60 mm
UPN Profiles (optional blade)	120 mm	140 mm	160 mm	180 mm	180 mm
IPN Profiles (optional blade)	120 mm	140 mm	160 mm	180 mm	180 mm
NOTCHING
Plate Thickness	10 mm	12 mm	13 mm	16 mm	16 mm
L of	100 mm	100 mm	100 mm	120 mm	120 mm
Depth	90 mm	90 mm	90 mm	110 mm	110 mm
Width	42 mm	52 mm	52 mm	58 mm	58 mm
GENERAL SPECIFICATIONS
Motor Power	5 kW	9 kW	9 kW	15 kW	15 kW
Strokes per minute (on 20 mm. stroke)	37	40	28	31	26
Maximum Stroke	60 mm	70 mm	80 mm	100 mm	100 mm

Capacities based on a material resistance of 45 Kg/mm2.
GEKA may change technical specifications, equipment and photographs of models, as well as any other information contained herein.
Technical characteristics valid except for typographical errors or omissions.

Hydracrop Series ironworker machines allow two operators to use these ironworkers simultaneously in 5 workstations, each of them dedicated to different ironworking tasks: punching, notching, shearing flat bars, angle cutting and shearing round and square bars.

There are 5 two-cylinder metal punching machines within the Hydracrop series, the number on their name reflects their punching power in tons. These are: Hydracrop 55, 80, 110, 165 and 220. They all have two versions, S and SD. The S version has a standard throat and the SD one has an extended throat.

Hydracrop Ironworker machines’ stations features

These Ironworker machines have 5 working stations, each of them is devoted to a different ironworking task: Punching, flat bars shearing, bars cutting, notching and angle shearing. The capability of the workstations may vary depending on the model, but their common features are:

Punching station: Independent guided punching cylinder that includes an anti-rotation mechanism and the possibility for optional or customized tools to be installed
Flat bars shearing station: Cutting in a progressive manner with minimal distortion. Cutting angles capacity in the flat bars station
Bars cutting station: Shearing of solid round and square bars and a variety of profiles, such as UPN, UPE, IPN, and IPE
Notching station: Rectangular Notching Station with tube or triangle notching as an option
Angle shearing station: This station can perform angle cutting tasks without deformation or material loss by using a patented rectilinear motion technology